Add：Jiangshan Town, Jiangshan Town, 390 Chaoyang Road, Ningbo, Yinzhou District
First, monthly maintenance of hydraulic platform trucks
During the monthly maintenance of the lifting platform, it is necessary to carefully inspect the hydraulic lifter's rollers, intermediate shafts and bearings, cylinder pin and bearing, boom hinge shaft and bearings, etc., for wear. The
1, check the hydraulic oil and oil level. If the hydraulic oil becomes dark, sticky or has foreign matter such as grit when the platform is raised all the time, it should be replaced (32# hydraulic oil).
2. Add some lubricating oil to each bearing part of the machine to extend the service life of the elevator bearing. The
Second, year-end maintenance of hydraulic platform trucks
1. Put the hydraulic oil out of the elevator, tighten the joint and take out the oil filter. After cleaning, clean it with compressed air, put it back in the tank, replace it with new oil, and connect the piping.
2. Check all the hydraulic pipes and joints of the lifting platform. Pipes must not be damaged, connectors must not be loose, and all connectors must be tightened. The
3, remove and disassemble the lowering valve below the high lift hydraulic platform car, blow the net with the compressed air, and then put it in and re-install it. Van.
Contact: He Bin
Add.：Jiangshan Town, Jiangshan Town, 390 Chaoyang Road, Ningbo, Yinzhou District